What processes or materials are involved in the noise of the medical line? In fact, it should be said that each process will have an impact.

1. Bundle: The raw materials shall be of good quality, free of oxidation and uniform wire diameter. The bundle wire shall be flat and neat without burrs and jumpers. Tight pitch.

2. Insulation: The insulation adhesion shall be as large as possible, but it shall also ensure that it can peel off. The multi-core lead wire, the adhesion of each core wire, and the ID of each core wire shall be uniform, and the average tolerance shall be controlled within 0.2.

3. Conductive layer: the conductive layer is a relatively important section, and it is relatively difficult to control. First of all, it is required to exert as much force as possible, ensure peeling, and ensure that the core wire is not sticky. The head and tail of each core wire shall have the same force and diameter.

4. Cabling: the cabling is tight and the filling is round. The shielding layer and outer sheath shall make the cable core as tight as possible. It should be adjusted on the premise of appearance, peeling, processing, softness and comfort.